進口離心管道清水泵

進口離心管道清水泵產品概述：

進口離心管道清水泵是單吸單級離心泵，單級離心泵主要由電動機、水泵、密封三部分組成。電動機均為單相異步電動機；水泵與電動機之間裝有單端面機械密封，固定止口密封處采用“O”形耐油橡膠密封圈作靜密封。進口離心管道清水泵具有體積小，重量輕、結構緊湊、安裝簡單方便的特點，是一種理想的高效節能型家用電泵，廣泛應用于農田灌溉、噴灌、園林噴澆灌、蔬菜大棚供水、養殖業給排水以及井用提水、自來水加壓等家庭生活用水之場合。  

進口離心管道清水泵,離心水泵 離心式清水泵簡稱“離心泵”,它是一種利用水的離心運動的抽水機械。由泵殼、葉輪、泵軸、泵架等組成。離心水泵起動前應先往泵里灌滿水，起動后旋轉的葉輪帶動泵里的水高速旋轉，水作離心運動，向外甩出并被壓入出水管。

進口離心管道清水泵工作原理：

進口離心管道清水泵是小型的離心式清水泵，能實現小流量小揚程等適合于家庭使用的環境。該清水電泵在下列使用條件下應能連續正常工作： 
1、介質溫度不過+40℃；  
2、介質的PH值為6.5～8.5之間；  
3、固體雜質的體積比不過0.1%，粒度不大于0.2mm；  
4、電源頻率為50Hz，電壓為單相交流220V，電壓波動范圍為額定值的0.9～1.1倍。  

進口離心管道清水泵技術參數：

泵出口直徑 DN 80~800mm  流量 Q ≤11600m3/h
揚程 H ≤200m             工作溫度 T ≤105℃  
固體顆粒 ≤80mg/L         工作許用壓力 ≤25   許用試驗壓力 ≤37.5

進口離心管道清水泵工作條件：  

流量范圍:0.8m3/h~120 m3/h; 揚程范圍:5.6m~330m;
溫度范圍:-20℃~120℃; 輸送液體種類:各種清潔水及輕腐蝕液體; 泵腔承壓:≤4.0MPa。

進口管道離心泵產品特點：

l、泵結構緊湊、體積小、外形美觀。其立式結構重心較低且重心合于泵腳中心，增強了泵的運行穩定性和壽命。
2、安裝方便。進出口徑相同并在同一中心線上，可像閥門一樣直接安裝在管路任何部位。電機加上防雨罩可置于戶外使用。泵設有安裝底腳，以便泵的安裝穩定。
3、運行平穩、噪音低、組件同心度高。電機采用低噪音軸承，并設有不停機加油裝置，泵葉輪具有極好的動靜平衡，運行無振動，改善使用環境。
4、無滲漏。軸封采用耐腐耐磨硬質合金機械密封，解決了離心泵填料嚴重滲漏問題，延長了使用壽命，確保了運行場地干凈整潔：
5、維修方便。勿需拆卸管道，只要拆下泵蓋螺母，取出電機及傳動組件即可進行檢修維護。
6、可根據現場使用條件，泵機可立式、臥式、多方式安裝，依據流量揚程要求，采用并、串聯方法，增加所需流量揚程

進口離心管道清水泵應用領域：

泵的零件用不銹鋼板壓制,經激光焊接而成,并有多種牌號的不銹鋼可供選用,因而單級離心泵的用途十分廣泛,主要適用于輸送各種潔凈水及輕腐蝕液體,可用于 住宅供水及增壓,工業鍋爐給水,空調系統循環體會水,水處理和反滲透系統,食品工業,醫藥工業用水

進口離心管道清水泵德國巴赫BACH售后服務：

的服務鑄就的企業讓客戶無后顧之憂。
1、按合同要求提供產品的合格證、銘牌、檢驗報告、產地證名、安裝說明書等。
2、顧客在驗收產品過程中，如出現與合同要求不符時，我司接到顧客通知后兩小時內給予處理。
3、我司提供十二個月以上產品質保期，時間從驗收合格之日起計算。
4、在正確安裝和使用下，出現產品質量問題，本公司將負責到底。

選擇德國巴赫的四大理由：

1：進步性 持續性

 回顧巴赫在的快速進步性 每年均高速增長，可預見一家大型的生產銷售企業的建立與發展，也必將在的閥門市場乃至機械行業的有所建樹。

2：可靠性

 德國巴赫的可靠性與產品之性能是公司經營理念重要組成部分。如期發貨，持續經營，高質量， 均經過嚴格的全面測驗。 這就是巴赫為何能高速發展，并且能提供越來越好的高質量產品，服務的原因。

3： 價格

 現代化工廠高端自動化數控生產線確保閥門與其配件價格合理，品質優良。

和持續不斷地投資于人力，設備廠房，為用戶提供性價格比高，品質優良的閥門。

4：客戶價值觀

通過集中采購 可以降低體的采購成本。

便捷的采購，有助于客戶優化配置人力資源，達到精簡高效。

借助巴赫充足的庫存小化客戶的庫存投入。

高品質的閥門將幫助避免因偽劣產品而導致的停產 停工 誤工。

Import centrifugal pipeline clean water pump

Overview of imported centrifugal pipeline cleaning pump products:

The imported centrifugal pipeline clean water pump is a single-suction single-stage centrifugal pump. The single-stage centrifugal pump consists of three parts: motor, water pump and seal. Motors are single-phase asynchronous motors; The pump and motor are sealed with a single end face, and the "O" oil resistant rubber seal is used for the static seal. Imported centrifugal pipeline pump has small volume, light weight, compact structure, simple installation, convenient features, is a kind of ideal efficient household electric pump, widely used in spray irrigation, sprinkler irrigation, garden irrigation water supply, aquaculture, water supply and drainage, vegetable greenhouses and well with the family life such as water, tap water pressure of water.   

Centrifugal pump centrifugal pump centrifugal pump is called centrifugal pump. It is a pumping machine which USES water centrifuge. It consists of pump shell, impeller, pump shaft, pump , etc. The centrifugal water pump should be filled with water before starting, and the rotating impeller drives the water in the pump to rotate in high speed. The water will be spun out and pushed out of the water pipe.

Principle of imported centrifugal pipeline cleaning pump:

Imported centrifugal pipeline clean water pump is a small centrifugal water pump, which can realize small flow small lift and other suitable for domestic use. The water pump should be able to work continuously under the following conditions:

1, medium temperature shall not exceed + 40 ℃;   

2. The PH of the medium is between 6.5 and 8.5;   

3. The volume ratio of solid impurities is less than 0.1%, and the particle size is not greater than 0.2mm.   

4. The power frequency is 50Hz, the voltage is single phase ac 220V, and the voltage fluctuation range is 0.9 ~ 1.1 times of the rating value.   

Technical parameters of imported centrifugal pipeline cleaning pump:

Pump outlet diameter DN 80 ~ 800mm flow Q less than 11600m3 / h

Lift H 200 T m working temperature 105 ℃ or less or less

The pressure of the solid particles is less than or equal to the pressure of 25

Working conditions of imported centrifugal pipeline cleaning pump:

Flow range: 0.8 m3 / h ~ 120 m3 / h; Range of lift: 5.6 m ~ 330m;

Temperature range: - 20 ℃ ~ 120 ℃; Type of liquid conveying: various clean water and light etching liquid; Pump chamber pressure: less than 4.0 MPa.

Characteristics of centrifugal pump product of imported pipeline:

L, compact structure, small volume, beautiful appearance. Its vertical center of gravity is low and its center of gravity is in the center of the pump, which increases the operation stability and life of the pump.

2. Convenient installation. Access to the same calibre and in the same Central Line, can be installed directly in any part of the pipe like a valve. Motor and rain-proof cover can be used outdoors. The pump is equipped with the bottom foot so that the installation of the pump is stable.

3. Stable operation, low noise and high concentricity of components. The motor adopts low noise bearing, and has no stopping refueling device. The pump impeller has excellent dynamic balance, no vibration and improve the use environment.

No leakage. The shaft seal adopts the anti-corrosion and wear-resistant hard alloy mechanical seal, solves the serious leakage problem of the centrifugal pump packing, extends the service life and ensures the clean and tidy running site:

5. Convenient maintenance. Do not disassemble the pipe, as long as remove the pump cover nut, remove the motor and the transmission component to repair and maintain.

6. According to the conditions of the site, the pump can be installed in a vertical, horizontal and multi-way, according to the requirements of flow lift, adopt and concatenate methods to increase the required flow

Application of imported centrifugal pipeline clean water pump:

Pump parts with stainless steel plate, the laser welding and become, and are available in a variety of grades of stainless steel is chosen, and single-stage centrifugal pump application is very extensive, mainly is suitable for the conveying of clean water and corrosive liquid, can be used for residential water and pressurization, industrial boiler feed water, air-conditioning circulating water system, water treatment and reverse osmosis systems, food industry, pharmaceutical and industrial water

Imported centrifugal pipeline clean water pump German BACH BACH after sales service:

First- service casts the first- enterprise to make the customer have no worries.

1. Supply the certificate of qualification, nameplate, inspection report, certificate of origin and installation instruction of the products according to the contract requirements.

2. In the process of acceptance of the products, if the customer is not in conformity with the contract requirements, we shall give the customer the treatment within two hours after receiving the notice from the customer.

3. We provide the product quality guarantee period of over 12 months, and the time will be calculated from the date of acceptance.

4. With the correct installation and use, the company will be responsible for the product quality problems.

Four big reasons to choose Bach in Germany:

1: progressive sustainability

Review Bach rapidly progressive growth each year in China, a large foreseeable production and sales of the establishment and development of the enterprise, will the valve market in China and even the machinery industry.

2. Reliability

The reliability of German Bach and the performance of products is an important part of the company's business philosophy. Delivery on schedule, continuous operation, high quality, all passed strict comprehensive test. This is why Bach is developing at a high speed and can provide better and better quality products and services.

3: price

Modern factory high-end automatic numerical control production line to ensure valve and its accessories are reasonable price, good quality.

And continuous investment in manpower, equipment plant, providing customers with high quality and high quality valves.

4: customer values

Centralized procurement reduces overall procurement costs.

Convenient procurement, help customers optimize the allocation of human resources, achieve streamlined and efficient.

Minimize customer inventory by using Bach's ample inventory.

High quality valves will help to avoid downtime due to shoddy products.