Resistance heating is one of the first applications of electricity..
In the course of a century, thousands of heating problems have been solved ranging from megawatts down to a few watts, or less.
The fundamentals are always the same, the requirements and solutions widely different.
Between a large furnace constructed as an individual unit and a domestic heater produced in large quantities, there exist a number of cases where no “ready-made” solution is available.
For such cases, THERMOCOAX often presents a suitable answer to:
Heating from the cryogenic temperatures up to >1000°C.
Heat dissipation either very low or very high power (from few watts to several tens of kilowatts).
For use in air, under vacuum or high pressure and in any corrosive environment compatible with the sheath material.
In applications requiring high reliability components.
Easy fitting
Electrical screening
THERMOCOAX heaters can be attached directly to metal parts
Tight bending radius
Only 3 times the outer diameter
Small dimensions
The heat can be generated exactly where it is required thus power losses are reduced as well as power consumption
法國熱纜公司(Thermocoax)公司標準熱電偶產品范圍:-200℃到1200℃,這些熱電偶不使用貴金屬?;K型,-Alumel?;(鎳鉻-鎳鋁),溫度范圍-200℃至1250℃,靈敏度41μV/℃,常用的?;J型,Iron-Constantan?;(鐵-銅鎳),溫度范圍-40℃至750℃,靈敏度55μV/℃?;E型,C h romel?;-Constantan?(鎳鉻-銅鎳),溫度范圍-200℃至950℃,靈敏度68μV/℃,非磁性?;N型,Nicrosil?;-Nisil?;(鎳鉻硅-鎳硅),空氣中溫度范圍至1200℃,真空或控制氣氛中達1300℃,靈敏度在900℃時為39μV/℃,與鉑基的熱電偶相比有非常好的穩定性。?;T型,Copper-Constantan?;(銅-銅鎳),溫度范圍-200℃至350℃,已不常用
THERMOCOAX Heating elements
Resistance heating is one of the first applications of electricity..
In the course of a century, thousands of heating problems have been solved ranging from megawatts down to a few watts, or less.
The fundamentals are always the same, the requirements and solutions widely different.
Between a large furnace constructed as an individual unit and a domestic heater produced in large quantities, there exist a number of cases where no “ready-made” solution is available.
For such cases, THERMOCOAX often presents a suitable answer to:
Heating from the cryogenic temperatures up to
>1000°C.
Heat dissipation either very low or very high power (from few watts to several tens of kilowatts).
For use in air, under vacuum or high pressure and in any corrosive environment compatible with the sheath material.
In applications requiring high reliability components.
Easy fitting
Electrical screening
THERMOCOAX heaters can be attached directly to metal parts
Tight bending radius
Only 3 times the outer diameter
Small dimensions
The heat can be generated exactly where it is required thus power losses are reduced as well as power consumption
Excellent heat exchange
Thermocoax公司標準熱電偶/傳感器
The heater can be brazed onto any metal piece
法國熱纜公司(Thermocoax)公司標準熱電偶產品范圍:-200℃到1200℃,這些熱電偶不使用貴金屬?;K型,-Alumel?;(鎳鉻-鎳鋁),溫度范圍-200℃至1250℃,靈敏度41μV/℃,常用的?;J型,Iron-Constantan?;(鐵-銅鎳),溫度范圍-40℃至750℃,靈敏度55μV/℃?;E型,C h romel?;-Constantan?(鎳鉻-銅鎳),溫度范圍-200℃至950℃,靈敏度68μV/℃,非磁性?;N型,Nicrosil?;-Nisil?;(鎳鉻硅-鎳硅),空氣中溫度范圍至1200℃,真空或控制氣氛中達1300℃,靈敏度在900℃時為39μV/℃,與鉑基的熱電偶相比有非常好的穩定性。?;T型,Copper-Constantan?;(銅-銅鎳),溫度范圍-200℃至350℃,已不常用
0℃到1600℃,鉑銠熱電偶?;S型,Platinum 10% Rhodium-Platinum (鉑10%銠-鉑),常用于氧化氣氛中,溫度范圍達1600℃,靈敏度6-12μV/℃?;R型,Platinum 13% Rhodium-Platinum (鉑13%銠-鉑),與S型類似,靈敏度6-14μV/℃?;B型,Platinum 30% Rhodium-Platinum 6% Rhodium (鉑30%銠-鉑6%銠),溫度范圍達1700℃,非常穩定,但靈敏度低,特別是在低溫范圍時,在室溫時就很微小了。盡管其高成本和低熱電功率,B型熱電偶一直是高溫測量的基礎。
0℃到2300℃,鎢錸熱電偶?;C型硬性或柔性,Tungsten-Rhenium 5%Re- Tungsten-Rhenium 26%Re,用于極高溫度的測量,可達2300℃,用于還原中和氣氛中,合金的熔點非常高,蒸汽壓力很低,但沒有延展性。柔性的熱電偶可測溫度達1800℃
部分產品型號:
1AcAc10A1 、1AcAc1016 、1AcAc1031.7A1 、1ZsAc10 、1II30AI 、2ZsZsAc20I 、2III10AI 、2III20AI 、4NAc20 、1AcAc20 、1ZsFCAc60 、TCDEEx 、TCMFFEEx
?Thermocoax公司標準熱電偶/傳感器
?